收藏本站
4
2.
Make the connections.
a.
Connect the four pin female header of the Communication/Power Cable to the
Communication/Power Header of your
LK162-12/VK162-12.
b.
Insert the male end of your serial cable to the corresponding DB9 header of the
Communication/Power Cable and the mate the female connector with the desired
communication port of your computer.
c.
Select an unmodified floppy cable from a PC power supply and connect it to the power header
of the Communication/Power Cable.
3.
Create.
?
Use uProject or a terminal program to get started, and then move on with your own
development. A number of application notes are available at www.matrixorbital.ca/appnotes.
I2C
Connections
A more advanced connection to the LK162-12/VK162-12
is provided by the I2C protocol setting. This is
best accomplished using a breadboard and the Breadboard Cable. Power must be supplied from your
breadboard or another external source. To dive right into your application and use the LK162-
12/VK162-12
in I2C mode, get started with the guidelines below.
1.
Set the Protocol Select switches.
?
I2C: Ensure that the two I2C jumpers in the corresponding protocol box are connected while all
others are open.
2.
Make the connections.
a.
Connect the Breadboard Cable to the Communication/Power Header on your LK162-12/VK162-
12
and plug the four leads into your breadboard. The red lead will require power, while the
black should be connected to ground, and the green and yellow should be connected to your
controller clock and data lines respectively.
b.
Pull up the clock and data lines to five volts using a resistance between one and ten kilohms on
your breadboard.
3.
Create.
?
This time you're on your own. While there are many examples within the Matrix Orbital
AppNote section, www.matrixorbital.ca/appnotes, too many controllers and languages exist to
cover them all. If you get stuck in development, it is possible to switch over to another protocol
on the standard board, and fellow developers are always on our forums for additional support.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
VK202-25-USB-E VF CHARACTER DISPLAY 20X2 USB
VK202-25-VPT VFD ALPHA/NUM DISPLAY 20X2
VK204-25-422 VF CHARACTER DISPLAY 20X4 RS422
VK204-25-VPT VFD ALPHA/NUM DISPLAY 20X4
VLM-532-42-SCA LASER MODULE 532NM 1-5MW DOT
VLM-532-46-LCA LASER MODULE 532NM 1-5MW LINE
VLM-635-14-SPA LASER MODULE 635NM 1-5MW DOT
VLM-635-15-LPA LASER MODULE 635NM 1-5MW DOT
相关代理商/技术参数
VK-170613 制造商:Messing Gegenmutter 功能描述:
VK-171502 制造商:Messing Gegenmutter 功能描述:
VK1AS001-MZZ00-000 制造商:Carling Technologies 功能描述:V-SERIES ROCKER SWITCH - Bulk
VK2/AO-1B 制造商:IMO Precision Controls Ltd 功能描述:PROXIMITY SWITCH M18 AC
VK2/AO-1B 制造商:IMO Precision Controls Ltd 功能描述:PROXIMITY SWITCH M18 AC
VK-20 制造商:Wieland Electric Inc 功能描述:ELECTRICAL, DUCT/RACEWAY (TRUNKING) 制造商:Wieland Electric Inc 功能描述:ELECTRICAL, DUCT/RACEWAY (TRUNKING); Raceway / Duct Color:Grey; External Height:21mm; Raceway / Duct Material:Polyamide; Series:Flexible Slot; External Width:23mm; Accessory Type:Wiring Duct; Body Material:Polyamide; Color:Gray ;RoHS Compliant: NA
VK200 10/3B 制造商:AMPERX 功能描述:
VK20009-3S WBC1.5/A-3S4 制造商:F-CUBE 功能描述: